+603-3290 7726
 +603-3290 7707

AERCOMP SDN BHD
7, Jalan Wawasan 2C/KU7,
Sungai Kapar Indah,
42200 Klang,
Selangor, Malaysia.
+603-3290 7726
+603-3290 7707
+603-3290 7727

POSITIVE DISPLACEMENT BLOWER STAGES

POSITIVE DISPLACEMENT BLOWER STAGES POSITIVE DISPLACEMENT BLOWER STAGES BLOWERS FOR AIR AND NEUTRAL GASES POSITIVE DISPLACEMENT BLOWERS


FOR THE OIL-FREE CONVEYING AND COMPRESSION OF AIR AND GASES

Robust 3-lobe blower stage for plant engineering. Suitable for a wide range of applications. Available as standard in 22 sizes (GM 3 S to GM 1080 L).

 
DESIGN
 
Blower with 3-lobe rotors and two cast-in preinlet channels in the discharge-sided cylinder part to minimze the sound by pulsation reduction. Housing ribbed and air-cooled. Blower cylinder undivided up to GM 400 L. From GM 430 S the cylinders are horizontally divided. Up to GM 80 L the feet at the blower are bolted on, larger sizes are cast on. Lube oil supply by splash lubrication.

 
MATERIALS
 
Housing parts (cylinder, side plates, gear case and housing cover) made of GG-20. Shafts made of C 45 N and rotors made of C 45 N (GM 3 S up to GM 80 L) shafts and rotors are forged in one piece. On size GM 90 S and GM 130 L pistons and shafts are cast of one piece EN-GJS-500-7 (GGG50). Rotors made of EN-GJS-400-15 (GGG40). (GM 150 S up to GM 1080 L) helical timing gears made of 16 Mn Cr 5E. If you have questions about any other materials please contact us.

 
SHAFT SEALINGS
 
Conveying chamber seal by 4 piston ring labyrinth seals with oil slingers at each shaft end. On request, 4 radial seal ring-piston ring labyrinth seals are available. Driving shaft seal by radial seal ring. In case of gastight design of the driving shaft 2 radial seal rings are used with an intermediate grease trap.

 
DIRECTION OF FLOW
 
From top to bottom (vertical)

 
POSITION OF THE DRIVING SHAFT
 
Left (viewed onto the driving shaft) alternatively the driving shaft is possible at the right

 
DRIVE
 
Overhung drive via narrow v-belt, directly driven via flexible coupling or with gearbox. 

 
TYPE OF TECHNOLOGY POSITIVE DISPLACEMENT BLOWERS
VOLUME FLOW 30 to 65000 m3/h
MEDIUM AIR, NEUTRAL GASES
CONVEYING OIL-FREE
NEGATIVE PRESSURE MAX, -500 mbar
POSITIVE PRESSURE MAX. 1000 mbar


AERZEN POSITIVE DISPLACEMENT BLOWER STAGES FOR EVERY APPLICATION.
 
AERZEN Positive Displacement Blowers (of the ''Roots'' type design) have been manufactured since 1868 and today are highly developed standard production machines designed and adapted to find use in a wide variety of applications.
 
The following are only a few examples of the many applications in which Aerzen Blowers can be used:
 
APPLICATIONS:
  • Water and waste water treatment
  • Pneumatic conveyance of bulk materials
  • Aeration
  • Filter backwashing
  • Gas conveyance
  • Degassing
  • Dust removal
  • Vacuum production
  • Biogas treatment 
  • Air separation plant
  • and many others

 
INDUSTRIES:
  • Sewage treatment
  • Chemical and process technology
  • Power plants 
  • Cement and lime
  • Foodstuffs
  • Paper
  • and many others
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version